Ceiling Light - Conical (Floral)
Ref: L-CL-003-HSF
The Conical Floral Ceiling Light is a refined sculptural ceiling piece defined by its elegant tapering conical form and intricate handcrafted metalwork. Mounted flush against the ceiling, the sculptural body narrows gracefully towards a refined lower point while the entire surrounding surface is entirely hand-sawn by master jewellers using Yahya’s signature intricate floral patterns. Concealed integrated lighting positioned within the lower section projects light upward through the intricate openwork metalwork, illuminating the sculptural form from within while casting delicate atmospheric patterns and shadows across the surrounding ceiling surface.
The source of illumination itself remains entirely hidden, allowing the piece to appear as a luminous sculptural form animated purely by light and shadow. Both architectural and atmospheric, the Conical Floral Ceiling Light remains a timeless expression of handcrafted metalwork, sculptural light, and refined contemporary decorative design.
Brass, Aged Bronze Finish.
Nickel Silver, Polished Finish.
400 Ø x 185 (h) mm
500 Ø x 230 (h) mm
600 Ø x 275 (h) mm
Flush ceiling lights are illuminated using ultra high-quality integrated COB (Chip-on-Board) LED systems specifically selected and engineered to produce the exceptional precision and atmospheric clarity characteristic of the Yahya collection. Unlike conventional E14, E27, or standard multi-source LED bulbs, which create diffuse and imprecise lighting effects, the COB LEDs used within these pieces function as highly concentrated and controlled singular light sources. This allows the intricate hand-sawn floral metalwork or Liquid Light micro-perforated surfaces to project remarkably sharp and refined atmospheric patterns across surrounding ceiling surfaces. The exceptional precision and depth of these luminous projections are only achievable through the use of these specialised integrated lighting systems combined with Yahya’s handcrafted metalwork techniques.
Each flush ceiling light is composed around a concealed structural ceiling plate fixed directly to the ceiling, within which the driver systems are discreetly housed and completely concealed from view behind a simple metal plate. The integrated LED module itself is positioned within the lower concealed structural section of the piece, carefully hidden within the non-perforated metal body so that the source of illumination itself always remains entirely invisible. Light travels upward internally through the sculptural hand-sawn body, projecting intricate atmospheric patterns and reflections across surrounding ceiling surfaces while preserving the purity and elegance of the overall sculptural form. The integrated LED modules are accessible through the removable hand-sawn body sections, allowing a qualified electrician to service or replace the integrated LED plates should maintenance ever be required. In most cases, after many years of use, the driver itself is typically the component requiring replacement rather than the LED module, which is supplied with a long-life manufacturer guarantee of approximately five years under normal operating conditions.
The flush ceiling lights can be electrified according to UK, European, or US electrical standards and may be supplied with compatible drivers and electrical configurations accordingly. Dimmable systems can equally be integrated upon request, including compatibility with protocols such as DALI, DMX, 1–10V, and other project-specific lighting control systems specified by clients or lighting consultants. Colour temperature is carefully selected according to the finish and atmosphere of each piece itself. Brass and aged bronze finishes are generally supplied at 2700K to create a warm candlelight-like glow, while polished nickel silver finishes are typically supplied at 3000K for a slightly crisper architectural illumination. Throughout the collection, the lighting philosophy remains consistent: the source of illumination is never directly visible, and the light itself becomes an atmospheric sculptural material revealing the craftsmanship, depth, textures, and projection work of each piece.
Our brass pieces are hand-finished and aged to a rich bronze patination, then protected using a strong satin interior varnish designed to preserve the finish while maintaining the natural depth and warmth of the metal. For regular care, pieces should simply be dusted using a soft dry cloth without water or abrasive cleaning products. Over time, as with all living materials, the finish may naturally deepen and evolve in tone, developing an increasingly antique character that forms part of the beauty of aged bronze and brass.
Exterior pieces are protected using specialist UV-resistant varnishes developed for outdoor bronze sculptures and artworks. While these finishes offer substantial long-term protection, natural weathering and gradual patination remain an inherent characteristic of the material over extended periods. Should the varnish eventually soften or wear after many years, surfaces may be gently waxed and buffed in the traditional manner used for fine leather or bronze objects.
Polished nickel silver is not an electroplated finish but a solid material that may naturally soften slightly over time through handling and exposure. As with traditional silver objects, the surface can be restored using standard silver polishes widely available in hardware stores, or through traditional methods such as gentle lemon-based cleaning. Microfibre cloths are recommended for routine care, while abrasive materials and scratching should be avoided. Due to the entirely handmade nature of the work, subtle artisanal irregularities, variations, and traces of hand craftsmanship form an intentional part of the character and authenticity of each piece.